Shop
-
Kramer cell is primordial to determine the hardness and tenderness of disparate, soft and small samples.
-
This test bench allows the determination of breaking force, friability or springiness.
-
This cell coupled with the traction mode of the TX-700 is essential for determination of tensile force.
-
Measuring spindles according to ASTM / ISO 2555 (316L stainless steel). These systems are ideally suited for simple viscosity measurement at controlled rotational speed in all areas of activity. The standard recommends use of 600ml beaker for measurement. These systems are compatible with all instruments and our temperature control EVA LR.
-
Measuring spindles according to ASTM / ISO 2555 (316L stainless steel). These systems are ideally suited for simple viscosity measurement at controlled rotational speed in all areas of activity. The standard recommends use of 600ml beaker for measurement. These systems are compatible with all instruments and our temperature control EVA LR.
-
Measuring spindles according to ASTM / ISO 2555 (316L stainless steel). These systems are ideally suited for simple viscosity measurement at controlled rotational speed in all areas of activity. The standard recommends use of 600ml beaker for measurement. These systems are compatible with all instruments and our temperature control EVA LR.
-
Measuring spindles according to ASTM / ISO 2555 (316L stainless steel). These systems are ideally suited for simple viscosity measurement at controlled rotational speed in all areas of activity. The standard recommends use of 600ml beaker for measurement. These systems are compatible with all instruments and our temperature control EVA LR.
-
Measuring systems for temperatures up to 300 ° C (316L stainless steel).
These systems make it possible to set the shear rate in order to carry out viscosity measurements or to obtain curves on products such as polymers, glues (hotmelts) or resins according to ASTM D3236 standard.
They can only be used with instruments with an AC 115 coupling.These measurement systems are not compatible with the B-ONE / FIRST PLUS and all instruments in LR version.
These measuring systems are compatible with RT3 temperature control. -
Measuring systems for temperatures up to 300 ° C (316L stainless steel).
These systems make it possible to set the shear rate in order to carry out viscosity measurements or to obtain curves on products such as polymers, glues (hotmelts) or resins according to ASTM D3236 standard.
They can only be used with instruments with an AC 115 coupling.These measurement systems are not compatible with the B-ONE / FIRST PLUS and all instruments in LR version.
These measuring systems are compatible with RT3 temperature control. -
Measuring systems for temperatures up to 300 ° C (316L stainless steel).
These systems make it possible to set the shear rate in order to carry out viscosity measurements or to obtain curves on products such as polymers, glues (hotmelts) or resins according to ASTM D3236 standard.
They can only be used with instruments with an AC 115 coupling.These measurement systems are not compatible with the B-ONE / FIRST PLUS and all instruments in LR version.
These measuring systems are compatible with RT3 temperature control. -
- Temperature range -20°C to +150°C (according to models).
- Available in version fluid, electrical and Peltier.
- Fast temperature regulation by Peltier element.
- Compatible with coaxial cylinders.
-
Measuring systems for temperatures up to 300 ° C (316L stainless steel).
These systems make it possible to set the shear rate in order to carry out viscosity measurements or to obtain curves on products such as polymers, glues (hotmelts) or resins according to ASTM D3236 standard.
They can only be used with instruments with an AC 115 coupling.These measurement systems are not compatible with the B-ONE / FIRST PLUS and all instruments in LR version.
These measuring systems are compatible with RT3 temperature control. -
Measuring systems for temperatures up to 300 ° C (316L stainless steel).
These systems make it possible to set the shear rate in order to carry out viscosity measurements or to obtain curves on products such as polymers, glues (hotmelts) or resins according to ASTM D3236 standard.
They can only be used with instruments with an AC 115 coupling.These measurement systems are not compatible with the B-ONE / FIRST PLUS and all instruments in LR version.
These measuring systems are compatible with RT3 temperature control. -
Measuring systems for temperatures up to 300 ° C (316L stainless steel).
These systems make it possible to set the shear rate in order to carry out viscosity measurements or to obtain curves on products such as polymers, glues (hotmelts) or resins according to ASTM D3236 standard.
They can only be used with instruments with an AC 115 coupling.These measurement systems are not compatible with the B-ONE / FIRST PLUS and all instruments in LR version.
These measuring systems are compatible with RT3 temperature control. -
Measuring systems for temperatures up to 300 ° C (316L stainless steel).
These systems make it possible to set the shear rate in order to carry out viscosity measurements or to obtain curves on products such as polymers, glues (hotmelts) or resins according to ASTM D3236 standard.
They can only be used with instruments with an AC 115 coupling.These measurement systems are not compatible with the B-ONE / FIRST PLUS and all instruments in LR version.
These measuring systems are compatible with RT3 temperature control. -
Measuring systems for temperatures up to 300 ° C (316L stainless steel).
These systems make it possible to set the shear rate in order to carry out viscosity measurements or to obtain curves on products such as polymers, glues (hotmelts) or resins according to ASTM D3236 standard.
They can only be used with instruments with an AC 115 coupling.These measurement systems are not compatible with the B-ONE / FIRST PLUS and all instruments in LR version.
These measuring systems are compatible with RT3 temperature control. -
Measuring systems for temperatures up to 300 ° C (316L stainless steel).
These systems make it possible to set the shear rate in order to carry out viscosity measurements or to obtain curves on products such as polymers, glues (hotmelts) or resins according to ASTM D3236 standard.
They can only be used with instruments with an AC 115 coupling.These measurement systems are not compatible with the B-ONE / FIRST PLUS and all instruments in LR version.
These measuring systems are compatible with RT3 temperature control. -
- Temperature range +12°C to +60°C (according to models).
- Compatible from RM 100 PLUS.
- Can accommodate two instruments.
- Support for 9 simultaneous samples.
-
- Temperature range +12°C to +60°C (according to models).
- Temperature control by Peltier effect.
- Compatible with all PLUS range viscometer.
- Rapid temperature setting of 600 ml and 150 ml beakers according to ISO 2555.
-
- Temperature range room to +300°C.
- Economic electric oven.
- Compatible from FIRST PLUS.
- Use of aluminium disposable cup.
-
- Temperature range room to +300°C.
- Double guidance of the geometries for a better repeatability.
- Compatible with concentric cylinder and cone plate.
- Use of aluminium disposable cup.
-
- Temperature range -20°C to +300°C (according to models).
- New gap adjustment ring.
- Compatible from FIRST PLUS.
- Removable lower plate.
- Temperature ramp programming (optional).
-
Anchor-type measuring systems (316L stainless steel). These systems are ideally suited for measuring viscosity (value or curve) in the control or development of heterogeneous products, or having the appearance of soft solid at rest, present in cosmetics, paint, food or mineral chemistry industries. Used with their respective buckets, they allow to apply a shear rate. These systems are not compatible with B-ONE / FIRST PLUS and all instruments in LR version. These systems are compatible with our EVA DIN-MSR and EVA MSR temperature regulation
-
Krebs type measuring spindles compatible with ASTM D562 standard (316L stainless steel). These systems are ideal for viscosity measurement in Krebs units in control of all types of products. They can be used for direct measurement in user containers or in 600 or 150ml beakers. These systems are not compatible with all instruments in LR version.
-
Anchor-type measuring systems (316L stainless steel). These systems are ideally suited for measuring viscosity (value or curve) in the control or development of heterogeneous products, or having the appearance of soft solid at rest, present in cosmetics, paint, food or mineral chemistry industries. Used with their respective buckets, they allow to apply a shear rate. These systems are not compatible with B-ONE / FIRST PLUS and all instruments in LR version. These systems are compatible with our EVA DIN-MSR and EVA MSR temperature regulation
